CMS 801sub
CMS 801sub is a compact ceiling-mounted subwoofer unit specifically designed to complement the full range CMS Series and CVS Series in-ceiling loudspeaker systems; delivering low frequency extension into applications that require a combination of premium sonic quality and output level for music and speech reinforcement, as well as long-term operating reliability and ease-of-installation.
The 200mm (8") driver, with long throw multi fibre paper pulp cone, and a 2nd order 160 Hz passive crossover are mounted in a vented,… Read More
Features
High Power & high sensitivity with low distortion
UV/weather resistant UL94V-0 ABS front baffle
Blind Mount & Pre Install options
Easily accessible tapping switch on front baffle
Low insertion loss 60W line transformer
Packaged with tile rails and C-ring for quick & easy installation and simple stocking logistics
Specifications
Frequency Response (-3dB) 1 58Hz - 160Hz
Frequency Range (-10dB) 1 42Hz - 300Hz
System Sensitivity (1W @1m) 2 92dB (1W = 2.45V for 6 Ohms)
Rated Maximum SPL Average 112dB
Peak 118dB
Average (with THP60) 110dB
Power Handling Average 100W
Programme 200W
Peak 400W
Recommended Amplifier Power 200W @ 6 Ohms
Nominal Impedance 6 Ohms
Transformer Taps (via front rotary switch) 70V: 60W / 30W / 15W / 7.5W / OFF & Low Impedance operation
100V: 60W / 30W / 15W / OFF & Low Impedance operation
Distortion 10% Full Power (7.75V)
2nd Harmonic
70Hz: 1.22%
100Hz: 0.38%
3rd Harmonic
70Hz: 1.90%
100Hz: 0.49%
1% Full Power (2.45V)
2nd Harmonic
70Hz: 0.91%
100Hz: 0.04%
3rd Harmonic
70Hz: 1.28%
100Hz: 0.44%
Crossover Integral 2nd order passive, 160 Hz
Transducer 1x 200mm (8.00") Long throw woofer with multi fibre paper pulp cone
Physical
Enclosure
Backcan Zinc plated steel
Baffle Reflex loaded UL 94V-0 rated ABS
Grille Steel, with weather resistant coating
Safety Features Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design Security toggle clamp
Backcan Options
Blind Mount (BM) Complete with fixed back can
Pre Install (PI) Separate back can for pre-installation
Cable Entry Options Cable clamp & squeeze connector for conduit up to 22mm
Conduit Knockouts 3 Sets of horizontal positions 19 / 22 / 28mm
0.75 / 0.87 / 1.10"
Connectors Removable locking connector with screw terminals with "loop through" facility
Safety Agency Ratings UL-1480, UL-2043, CE
BM Hole cutout Diameter 295mm (11.61")
PI Hole Cutout Diameter 295mm (11.61")
Dimensions
Bezel Diameter 325mm (12.80")
BM model: Front of ceiling to rear of back can 310.5mm (12.22")
BM model: Front of ceiling to top of safety loop 327.8mm (12.90")
PI model: Front of ceiling to rear of speaker unit 117.50mm (4.63")
PI model: Front of accessory back can bezel to top of safety loop (PI) 168.5mm (6.63")
UPC: 503586614730
